Try this tool once and you'll wonder how you ever got along without it!
The Regen Puller System was designed for fast pulling under low pulling loads.  This hammer accessory also serves as a holding device, preventing the tool string from falling down the probe hole.  It is ideal for use with Macro-Core® and Dual Tube systems, and can be easily used with a Geoprobe® 6600 series direct push machine or with a 5400 series machine equipped with a Rod Grip Pull System.  Our testing engineers like this tool because it's very "forgiving" with poor tool/machine alignment.

Regen Puller System Application and Features:

• Used for low-load (regen mode) pulling applications with 1.25-inch and 1.5-inch probe rods.
• Used as a holding device to prevent the tool string from falling down an open probe hole or casing.
• Ideal for use with Macro-Core® and Dual Tube sampling systems.
• Can be used to push Macro-Core® Closed-Piston Sampler down open hole to next sampling interval.
• Universal design for use with 5400 Series and 6600 Series Geoprobe® direct push machines.
• Optional rod holder base assembly for use with Dual Tube sampling system.
• Can't fall off... bolted directly to the machine hammer.